Chembuster Construction Details

Dit artikel moet nog vertaalt worden in het Nederlands, wie kan/wil dit doen?

Don Croft, a patriot, alternative scientist, researcher, inventor and freedom fighter has succeeded in striking the first blow against the ongoing chemtrails program that is assisting in the destruction of our country and the enslavement of its citizens! . By utilizing the research of Wilhelm Reich, assisted by his partner Carol and having help from God almighty, Don has created a cheap, portable and easy to build device that consistently destroys Chemtrails and heals the atmosphere. The Reich/Croft ” chembuster” is the answer to these ongoing attacks by the forces of darkness. Unlike the original cloudbuster, the chembuster actually changes the deadly orgone energy to good orgone energy and so does NOT become saturated or dangerous to the operator.

Do not use amphetamine and dextroamphetamine if you have used an MAO inhibitor such as furazolidone (Furoxone), isocarboxazid (Marplan), phenelzine (Nardil), rasagiline (Azilect), selegiline (Eldepryl, Emsam, Zelapar), or tranylcypromine (Parnate) in the last 14 days. A dangerous drug here interaction could occur, leading to serious side effects.
You should not use this medication if you are allergic to amphetamine and dextroamphetamine, or if you have hardened arteries (arteriosclerosis), heart disease, moderate to severe high blood pressure (hypertension), overactive thyroid, glaucoma, severe anxiety or agitation, or a history of drug or alcohol addiction. Some stimulants have caused sudden death in children and adolescents with serious heart problems or congenital heart defects.
Read this blog: adderallglobal.com blog
nulpuntenergie.net

Chembuster Construction Details

The following was written by Don Croft, who lives in vagabondage
www.worldwithoutparasites.org

Don is using Orgone energy, which was the name given to ch’i, ether, life force, etc., Dr Wilhelm Reich.

He does this out of respect and gratitude for Reich’s life’s work and sacrifice.

CLOUDBUSTER DIRECTIONS

Carol and I got these specs by dowsing, and they work very, very well, though may not be the last word, if you get my drift. Let us know at [email protected] if you can successfully modify it.

BUCKET: Base: 9″ in dia., 9″ deep. I use two-gallon plastic buckets from the Home Depot paint department, but two-gallon food buckets, available from restaurants, or two-gallon spackle buckets from drywall contractors are fine. I leave the buckets on, as the handles make it easier to move the finished cloudbuster.

COPPER PIPES: Six standard 1″ copper pipes, 6′ long, open at one end, the capped ends submerged to within an inch or so of the bottom of the bucket before casting. For portability and shipping, you can use 12 sections of pipe in the base, adding five-foot lengths by putting couplers between the 12 and five-foot pieces. You wont need
to buy as much copper pipe this way, too.

CRYSTALS: I glued a double-terminated quartz crystal, about 2″ long, into a .75 section of garden hose, and one of these devices is glued in turn inside each of the six copper end caps, pointing in the same direction as the pipe will be after the cap is glued on. I use ‘Goop’ glue. I taped around the cap where it joined the pipe to prevent resin from leaking into the cap during casting. David at [email protected] sells suitable crystals for cloudbusters.

METAL PARTICLES: Get some metal particles from a machine shop, recycling yard or a place where they saw a lot of aluminum (sign shops and aluminum fabrication shops are good places to look). I use aluminum for weight considerations, but ANY metal will do. Very fine particles (such as filings from a key-making machine)
arent quite as good as ones that will easily go through a window screen & slightly bigger ones are okay. There really is a wide margin of suitability! .

PLYWOOD: Template 1 – 3/4 exterior plywood is used to make the base for the copper endcaps/pipes. I arrange the six pipes evenly around a 2 1/2 radius circle, which makes the pipes 2 1/2 apart on centers. A flat, 1 1/4 auger bit drills a suitable hole for each end cap.

Template 2 – Make another piece to fit inside the rim of the bucket. Remember to cut a section away so you can fit your fingers under it to remove it from the bucket. This piece is not part of the finished CB, just used to get the spacing for the pipes right during construction. Cut the holes in this with a 1 1/8 flat bit so that it will fit well over the six pipes. This piece will hold the pipes in position while the second batch of resin hardens.

Template 3 – I make a circular plywood spacer for the top ends of the pipes, 4 radius with 1 1/8 holes on the same 2 1/2 radius circles for the pipe ends. This keeps the pipes parallel with each other and fairly rigid so you can point it at unholy things like predatory entities and City Hall 😉

RESIN: I use polyester resin (used to build fiberglass boats) but epoxy also works, as does envirotech resin from www.eti-usa.com (this sets up very quickly, so you need to be proficient with it). (If you are going to construct many of these units, try to purchase your resin in 5 gallon buckets over the internet, possibly from
a surfboard or boat manufacturing supply company. Home depot gets $24 per gallon for resin and I am sure it should be cheaper than that)

On a level surface, pour an inch or so of catalyzed resin into the bottom of the bucket and stir in metal particles until the surface is uniform and flat.

The ratio that seems to work is approx. one part resin to one part metal particles.

Put the base wood Template 1 onto that before it hardens, so that it just touches the surface and doesn’t sink in much. Pour a half gallon of catalyzed resin into the bucket after the six pipes are set into the holes in the base template. Use the dowel to stir in handfuls of metal particles in the same ratio as before. Note that the wood Template 1 should not be pushed down to the bottom of the bucket with the resin squishing over the top.

Expeditiously move the Template 2 down on to the six pipes until it is snugly within the rim of the bucket. Put the top Template 3 onto the top of the pipes and move them until the pipes are parallel. After the resin has hardened, remove the second template and set it aside. This is only used during construction, as I mentioned.
You can finish off putting the resin/metal mixture in now in two stages if you want, up to within a half inch of the rim of the bucket. Now its finished (wait until it hardens before you shoot anything 😉

A MONEY SAVING SUGGESTION, ALSO FOR BETTER PORTABILITY:

Cut six pipes, 12″ long, and put the cyrstals/endcaps on them for the base. Buy six joints which allow a pipe to come into them from both directions and stop at the middle. This allows you to make the rest of the pipe assembly from three pipes, 10′ long, cut in half. The finished product leaves you with only one piece of pipe, four feet long leftover.

When positioning the 12″ pipes for pouring the second layer of mix, temporarily tape the top ends of the 12″ pipes so no metal particles are dropped in them by mistake.

After the mix is made, take off the tape and push the rim plywood piece down onto the pipes so that it fits into the rim of the bucket.

Put the spacers, then the 5′ pipes onto the 12″base pipes, then put the third (top) plywood piece onto the tips.

The pipes will look skewed, most likely, so just twist the top plywood piece around until the pipes line up parallel. As you do that, the rim plywood piece will move around. You need to do this expeditiously, though not in a hurry, so that the resin doesn’t harden before you’re done.

We experimented with 5′ extensions to the pipes to increase the range. It had a strong effect on the moon and on the upper atmosphere of the planet for hundreds of miles. We also apparently shut down the weather warfare facility under Homestead Air Force Base while we were in the Keys by leaving the extended cloudbuster pointing
at the dead orgone field above it for a week.

We found that we don’t need to point it in any particular direction in order to clear the atmosphere of bad orgone, and the longer it’s left standing, the nicer it feels for a longer distance from the cloudbuster (many miles). We just stand it on its bottom, pointing straight up. We did once eliminate a belt of smog which was just off the coast by aiming at it for a few minutes, so direction can be a factor.

We also severely alarmed the operators of a ufo that was in the vicinity. It instantaneously shot out into space, where it remained in the same position relative to us, so the b! asic 6′ long pipe c
onfiguration apparently only affects the atmosphere.

Do be discriminating which ufos you aim at, though. If they are not predatory and you make them mad, they may pay you back by messing with your carburetor or something, as they did to us once. The really advanced ones are not susceptible to the cloudbuster, as they apparently dont need a deadly orgone field to operate. Our take is that all but these use nuclear fusion or some other noxious, old-paradigm energy source. Its open season on the B Sirian craft and other predatory ones, as far as were concerned. They cant hurt you, by the way, if you arent afraid of them. Universal law restricts them more than it does us. We can pay later for breaking it, but they are just unable to break it, apparently.

Cloudbusters destroy chemtrails consistently. It may take a few days for your cloudbuster to activate the environment enough to do this, but after that point the spew will disappear within seconds of leaving the UN jets and dissipated trails that drift within range of the couldbuster will also disperse, but more slowly. The ones that are made up of solids take longer to dissipate, but weve found that these only make up about 10% or so of the spewing episodes.

The evil intent of the UN is most apparent to me in the fact that Lucis Trust (formerly Lucifer Trust) publishes all of its official literature and dictates its philosophy. Only this belief system, which closely resembles the doctrine of the Nazi party, could condone the rampant genocide which is now being carried out by the UN.

Dr. Reichs cloudbusters were extremely dangerous when in operation since he had no orgone generator attached to them. Bad orgone does carry a charge which can quickly drain ones life force away when its concentrated in one spot. It’s slightly similar to a strong positively charges static electrical field. When cloudcover is unproductive or unbalanced (too much lightning, for instance, or too much rain) the cloudbuster busts it up. We plowed a furrow through a line of artificially created thunderstorm in June, 2001. Carol said the square-shaped thunderheads were chock full of predatory ET’s, bent on mutilating animals at the time.

It also stops droughts. Overall, it just balances the weather, I think it sort of mediates between the ground and the atmosphere somehow.The one in Namibia finally brought heavy rain to the desert there. It happened 9/5/01, and continued for several days. Gert, the fellow who made the cloudbuster and reported the occurrence, told me that this had simply never happened in the Namibia desert before to the best of anyone’s knowledge. It’s arguably the driest region on the planet.

WARNING: If you touch the pipes when theyre drawing in strong unbalanced or dead orgone and dont put your hand on the base after that, you may experience headaches, even into the next day, as a friend of ours did recently.

Mind you that our efforts, though somewhat pioneering, should be seen mainly as a springboard for further developments rather than the last word.

Somebody’s starting a list for cloudbuster aficionados shortly.

The HHG (Holy Hand Grenade)

The HHG (Holy Hand Grenade) is a small orgone generator that will correct imbalances in energy fields.


HHG Construction

If you want to clear out the unpleasant entities from your immediate environment, expel parasitic/predatory ETs from your auric field, neutralize the energetic effects of chemtrails, etc., just make one or more of these and put it on the ground or in your house, according to your intuitive promptings.

My partner, Carol, and I have found ! them very effective for minimizing the deadly orgone fields around nuke plants, even the ones built on natural vortices (sick puppies did that intentionally). They also heal and strengthen all natural vortices and man-made ones, like the Caribbean Blue Holes. Life doesn’t have to be difficult and years of training and discipline are no longer necessary if you want to do big magic, to which I can bear witness. In the new (present) paradigm ones character and intention count more than training and institutional acclaim.

There are plenty of people who are nice, but these arent generally smart. There are about as many people who are really smart, but they tend not to be very nice. Have you noticed that more nice people have been smartening up lately? I would say that thats happening more than smart people are getting nice. Does this mean that the meek
are inheriting the earth’?

You might think Im digressing, but the Y factor is very important when working with orgone. Y stands for you. Orgone is attracted to nice people and is repelled and even changed into deadly and/or dead orgone by unpleasant, selfish, fearful people. For example, a Joe Cell might not work for Joe Stalin, Count de Sade or Henry Kissinger. ( I really think its okay to draw attention to predators). Orgone accumulators are susceptible to depletion and pollution by unhealthy orgone, but HHGs (orgone generators) draw in the bad stuff, transform it into healthy orgone, and send it back out. Miraculous! Astonishing! Fabulous! Thank you, JESUS! Predatory people are challenged to lighten up or leave the vicinity of orgone generators. Were about to see the effect of one in a federal kangaroo courtroom shortly (we wont actually be present). Speaking of predators[update: this device was getting the desired effect, but the judge and prosecutor contrived to keep it out of the courtoom after that and managed to railroad the defendant into prison, unfortunately]

Most people will be content to have a HHG in the home to keep the energy clean and healthy there. It doesnt matter where you place it to do this. A few people have the skill and inclination to find vortices, so heres some advice based on what weve been doing:

If you can dowse with a pendulum or rods, etc., that may be the best way to find the right spot to put a HHG. Its especially effective when placed on a ley line and especially on the junction of two or more of these, but this isnt necessary. Every room and building has its own dynamics, so you could dowse for the correct spot based on that.

If your house is built on one of these leyline junctions, though, lucky you! More often than not these days the vortices produced by these nodes are distorted and even backward-spinning. The HHG very quickly heals and redirects these on its own. You dont need to do anything else (dont hate me because Ive given you an easy, inclusive way to do this ;-). If youre a weird science guru or wannabe youre probably not reading this anyway). Most of us just want to have a nice feeling in the house and immediate vicinity. You can put a HHG anywhere for this.

One thing that has worked for us in locating major vortices: think of the place from which the most degenerate, unspeakable things have been promulgated and you may find that it has been built over a vortex. Examples: The Federal Reserve Bank of New York/World Trade Center; the Pentagon; NSA headquarters, Montauk, New York;
Jekyll Island Hotel, Georgia. We already did those, but there are a few more of these left to do (as of May 12, 2001) such as the city reservoir of San Diego, Bohemian Grove, near San Francisco, Denver Airport (the new underground facilities have nothing to do with airplanes 😉 a spot in Salt Lake City, 3 in LA, etc. This really is fun but if you do one of these, make sure you can have a day or so afterward to recuperate. Also be sure to ask for divine protection 😉 Well be visiting those spots shortly. We develop sort of energetic callouses when we do it often enough, so that we dont miss a beat afterward. [update: we finished them at Bohemian Grove, California, which is a satanic gathering site for all of the top world order leaders, on June 18, 2001]

If there are places in your area at which evil has been done on a large scale, put an HHG there, too, to correct the imbalance. We put on
e in the witch cemetery in Salem, Mass, for instance (because of the evil done TO the witches, of course). There are plenty of places where atrocities were committed by the alleged govt on people of color, unfortunately, and every populated area (except in Utah) has been violated with chemtrails on a daily basis lately. Pollution = deadly/dead orgone and is the sure
sign that something is being done to violate/destabilize that part of the planet. Its so easy to turn that around with a HHG and/or a cloudbuster (let me know if you need cloudbuster directions). [email protected]

ENOUGH EXTEMPORIZATION HERE IT IS:br />
INGREDIENTS FOR THE HHG:

A plastic funnel or cardboard party hat (tape the seam so the resin doesnt leak out) To form a point at the end of the funnel, saw off the spout and form a point with 2 wide masking tape, being sure to prevent leaks. The funnel will allow you to make several from this mold. Party hats are better if you just want to make one. When I make them with party hats, I leave the hats on the finished HHg.

A couple of cups of aluminum particles (OR a pint of BBs). I use aluminum from the crosscut saws in shops that use extruded aluminum a lot, such as large sign shops, fabrication plants, etc. Some plastic and/or wood in the sweepings is fine. I pick out the cigarette butts for aestheic considerations 😉 Larger towns and cities have recycling businesses that have the aluminum particles in large bins, which they sell cheaply.

A quart of polyester resin or epoxy resin (this will encourage you to make at least two 😉 More politically correct resin is available from Envirotech, at www.eti.com.

5 double-terminate quarts crystals, at least an inch long. Cloudy and funky are fine, even if an evil person has handled them 😉 The mere proximity of an HHG to any crystal will clear it faster and better than all the combined resources of the most powerful new age gurus or shamans on the planet. Im just the messenger here, so dont hate me. The meek are inheriting the earth, after all. Others have told me that orgone generators remove the cloudiness of quartz crystals. Mine are already clear, so I havent seen it
happen, myself. One of mine did turn clear when I went to the Bahamas. Im pretty sure the Atlantean energy at the Mars Bay blue hole did that.

Global Light Network will sell you 5 appropriate crystals from Arkansas for $7, including shipping. Contact David for these at [email protected]

The plastic funnel needs to be big enough to make a 4 high cone. The bigger the cone, the more powerful the HHG. I encourage you to experiment with different configurations. Let me know what you find out, please, since youll likely surpass my own efforts thus far. We made one 7 high for the vortex at the secret underground base near San Diego from which a few investigators never returned. We deployed that one on 6/16/01. Boy, are they mad at us! Wed never been surveilled so much before that day.

Set the funnel, point down, in a can or jar.

Put some aluminum particles or BBs in the bottom, enough to make the vertical crystal stand on its own. I put the better defined end of the double terminated crystal toward the point of the cone.

Pour some resin on top of that and let it soak down through the metal particles.

Put enough aluminum particles or BBs to cover the rest of the vertical crystal and pour enough resin in to cover that.

Place the other four double terminated crystals horizontally, aligned 90 degrees apart so that the four compass directions will be covered when youre ready to deploy the HHG.

Make a mark on the funnel to indicate where the point of one of the bottom four crystals is if you want. This is marginally important. I never do that, myself.

Cover the four crystals with aluminum particles or BBs and cover that with resin. At this point, make the funnel level, either visually or with a spirit level (the ruler with the bubble thing built into it). You dont need to get it perfect, but perfect is a little better than not. I never fill it to the edge of the funnel, since this makes it harder to finish off and is pretty messy.

If you want to make a really big one, make a paper cone (taping the seam) out of a big piece of thin poster board and tape that into a large funnel. Well be putting a big one in the reservoir in San Diego [done, June 01] and at the huge vortex southeast of Bimini soon. Those vortices are particularly big and distorted for some reason.
Remember that lining up with the compass points is not critical. I put small parachutes on the ones I use in deep water locations so that theyll be upright when they reach bottom.

Make a mark on the flat part of the hardened material now so youll know how the four bottom crystals are aligned, since you cant see them any more.

Take the now-usable but crude HHG out of the funnel now and file the material at the little end down to create a point on the cone. I use a rough belt on my belt sander for this, but feel free to do it the hard way. You can file the edges of the bottom a little if you dont want to cut yourself with it later.

Having made the mark on the bottom, you can line it up to the compass wherever you put it. Put another mark near the bottom of the cone surface to make this easier 😉 This is optional, as it works fine if not lined up with the compass, too.

You can make it a little better by getting fancy crystals if you want. You can probably improve it in other ways, in which case, please inform me at [email protected] I wont make these for money but feel free to do so yourself. Ive capitalized this way on the pioneering work of other people.

To juice it up even more, make a copper coil on the outside of the funnel or party hat, being sure to wind the wire clockwise toward the point (as viewed from the bottom of the cone toward the point. Do 7 turns or so. Install this in the cone before putting the other ingredients in. This suggestion! is from (through 😉 our masterful friend, Linda
at www.spiritherbs.com, who is also a Wingmakers aficionada.

THERAPEUTIC HHG (not for everyone, but body workers find them helpful, as do meditators and energy experimenters)

Do all of the above in a smaller funnel . The resulting cone should be under 2 or so, simply because this is easier to use. Youll need non-ferrous metal, preferably aluminum because its easier to tool.

Instead of quartz, get an amethyst gemstone for the top and a garnet gemstone for the bottom, center (we use 9mm amethysts and 6mm garnets). In between, put a strong neodymium magnet. North side down is customary, but when a single magnet is used, weve found that it doesnt matter which pole is toward the body. This is true only when an array is used which causes one pole to be dominant in the field. Be sure to get some aluminum material around the magnet before pouring more resin in so it doesnt jump toward the can holding the funnel. BBs arent appropriate for this, since theyll just ball up around the magnet and drive you berserk.

You need to allow enough space in the pointy end to round off the point to about a half inch diameter without assaulting the amethyst during the rounding process. I use a belt sander to round off the top but you can do it with a file or a rough rock if youre a Luddite.

Rounding the top makes it better than the big HHG for directing energy through the bottom into the human body, especially at chakras. This one is fun to wear over the crown chakra or sixth chakra. A new meaning for the term,party hat. It does seriously get rid of pain and will speed healing to any part of the body. It also prevents nightmares and promotes lucid dreaming and meditation. When Im meditating, some accuse me of sleeping. The occasional snoring is done just to jerk them around – self righteous twits!

If you want to put a copper, cone-shaped spiral in
this one, contact me for further instructions (thanks, Linda!).

I WISH I KNEW HOW THIS WORKS

Thanks a lot for the account of your farmer neighbor, Ber. I saw recently that ALL of the madrone and myrtle trees along I-5 in Oregon are dead now. I saw a bright green fungus on all of the deciduous trees in that area during the winter of 99-00, which I attributed at that time to the mycoplasma of the ever-present chemtrails. I read that nearly all of the foals born in Kentucky this year were DOA and/or malformed.

Here’s our take on how the cloudbuster works, and also how the UN chemtrails, HAARP, and electronic mind control are able to function. It all has to do with non-electromagnetic energy in the form of deadly and/or dead orgone. I use Dr. Reich’s terms for this energy, since he’s the only scientist who has done extensive research with it.

I used to make orgone accumulators. I made them in many shapes and sizes and recognized the benefits and advantages from the beginning. The only drawback to these is that they absorb harmful orgone as readily as they do healthy orgone.

Orgone is omnipresent. It’s ether, life force, prana, ch’i, etc., and makes up the energy and matter potential in all of creation. In its balanced state it promotes life, growth, equilibrium, but in its unbalanced state (deadly orgone is overactive orgone, dead orgone is, well, DEAD) it has exactly the opposite effect. When you see smog, you’re seeing dead orgone in which particulate matter is suspended, sort of like a colloid. Very strong wind, tornadoes, hurricanes, cloudcover which yields no rain, drought, are all manifestations of harmful orgone.

In order for any parasitic activity to take place, an energy field needs to first be developed. Parasites do that in the body by excreting acids into their immediate environment. Infections, chronic pain, and a host of symptoms are manifestations of the activity of these parasites. Healthy orgone results when the polarity of the parasites’ environment is reversed from positive (acidic) to negative (slightly alkaline) by the introduction of weak electric current through the skin. This is the business we’re currently engaged in, so we get plenty of data and confirmation regarding this process.

In the atmosphere, agents of the present day order create massive fields of unbalanced orgone energy by introducing very powerful, specific frequencies of radio waves, spraying large volumes of acidic petrochemicals above the clouds, and by other, less believable means. Enter the orgone generator.

My frustration with the orgone accumulator’s fickle behavior was answered three years ago, when one of my customers directed my attention to www.orgone.net he was actually experiencing some frustration, since he paid $500 for $5 worth of epoxy and metal particles, and apparently nothing else.

My daughter, Nora, was living with me then. She sees energy the way my new wife does (we’ve been together a little over a year) so as soon as I put the two materials together, she confirmed that it was, indeed putting out a very strong, constant field of healthy blue orgone. Adding crystals and copper pipes made it possible for me to direct the energy and alter the characteristics of the field.

One of my first thoughts was that I could create a cloudbuster that didn’t need to be connected to running water, or any water, for that matter, as Dr. Reich’s needed to be, and I could set it up to aim at city hall in the town I was living in, Ashland, Oregon. Theyr’e as crooked as any other local government, so I expected to get some good, observable results.

It was some time before I got around to making a cloudbuster, though. Nora could see energy, but I needed some input from somebody older than twelve. A little over a year ago, Carol and I started working together. We began experimenting with small orgone generators, mostly around natural vortices, which Carol is able to see. Every one we’ve ever encountered since, except the one the Navajos nurture at Four Corners, has been distorted and misdirected by the present day order.

In each case, putting an orgone generator within the vortex brought it back to vibrant health and balance, sometimes instantaneously, other times, as at the Federal Reserve Bank of New York, and at the secret facilities under Montauk, NY, over a period of hours and even days, depending on the nature of the activities carried out within the vortices previously… We developed the Holy Hand Grenade (HHG) during this time, which is a cone shaped orgone generator, 5” or so high, with a vertical crystal inside near the point and four horizontal crystals arrayed within the bottom surface.

We’ve put these in vortices along the east coast of the US and across the country to the west coast, in Canada and the Bahamas. We’re just getting started. Some intrepid Canadians are about to put one each at the Vatican and Assisi. I’m recommending that people put one at every major masonic temple in the world, since any time you put one in a focal point of error, the whole region gets the benefit and the people of error get deprived of the earth energy they had been abusing.

I wrote a full account of our activities over several months, which anyone can have if they email me. It’s also being published serial fashion in Open Line, a monthly metaphysical newspaper. There’s no physics like metaphysics, after all.

In late March, this year, we had planned to make a sort of pilgrimage to Orgonon, Wilhelm Reich’s home and lab in Maine.

I set it up at our site in the RV campground in Ft Pierce, Florida for several hours while we packed, then took it apart and put it in the car. I didn’t assemble it again for another week, when we arrived in Maine. We looked at the weather channel in the motel, and noticed that the whole state of Florida was still experiencing a drought, but there was a circle of heavy rainfall for a twenty mile or so radius around Ft. Pierce.

The next morning, on a whim, I assembled the cloudbuster in our motel room. There had been very heavy overcast for days, and another blizzard was forecast for that day. We went outside at about 8:30 to get breakfast and saw a neat blue hole right above us, and several people were standing around, staring at it. It was surrounded by the same, very dark clouds that had been there for days. The hole grew gradually for several hours, even after we left that afternoon. The people at the Reich Museum had made it clear that we were not welcome, sad to say, though I had emailed them a couple of weeks before to let them know that we’d be in the area. I think
they’ll take things like that more seriously in the future 😉

Here’s how we think it works–when metal particles are put in an organic matrix, orgone is apparently generated instead of just accumulated. I don’t know why. When unbalanced orgone is present, it’s drawn into the orgone generating material and transmuted into healthy orgone. I don’t have a clue how this happens, either.

Making an orgone generator in a two gallon bucket and sticking copper pipes straight up out of it draws harmful orgone into the generator from many miles around and it goes out as healthy orgone in all directions, though Carol sees it happening in a sort of lens shape, parallel to the ground more or less, then moving up into the atmosphere. This gradual effect may explain why it sometimes takes a cloudbuster up to a week to get enough good stuff up to the 20,000′ + altitude to disappear the chemtrails. The average radius for effective chemtrail destruction by a cloudbuster seems to be about thirty miles. Good weather effects extend a great deal farther. The rest of the region has had a drought, but the area around Spokane has been getting rain every week or so all summer. As we drive along I-90 toward Settle, there’s a lot of new green growth and flowers all summer long until we reach the Columbia Gorge, 150 miles west. Anyone who lives here
can tell you that this is no